Have I got a concept problem? Please set the HDD jumper to as shown below: Flash BIOS to latest version. My computer was running fine. How can I fix it?

Uploader: Kazragami
Date Added: 7 November 2011
File Size: 59.73 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 83866
Price: Free* [*Free Regsitration Required]

How can I fix this? SATA drive not detected. Will look some more. Hi under Advanced in your bios is there anything like Raid Rom if so try disableing it then your pc wont look for raid devices and u should be able to boot strieght to your HDD u have installed.


Please entry the setting, choose your SATA drive as the “1st Drive” and then press “F10” to save the setting and exit. No drivers for windows 7, here at the homepage: For Z68 Extreme4, please connect to the ports as shown below. Points of Attention — Before you start to process the Hot-Plug: Results 1 to 10 of Ask Talk to Expert.

Instant Repair Help over the Asrock p4v88 sata 6ya. Please kindly double check the asroc setting of your HDD, and adjust the jumper setting to the correct position instead of the “Limit drive capacity” position. We receive spam notifications and will take immediate action! Not finding what you are looking for?


Here’s a link to this great service Good luck! Points of Attention — Before you process the Hot-Unplug: More Print this page Share this page.

ASRock P4V88 – motherboard – ATX – Socket 478 – PT880

Please report all spam threads, posts and suspicious members. The max point reward for answering a question is The EaseUS software should let you create a bootable optical disk where you should be able format each hard drive without booting to XP.

Press “Enter” to get into the “Array Detail” Step 3: If you would like to use whole GB as only one partition while installing the Windows OS, please make sure that your OS is Windows service pack asrlck included or Windows XP service pack 1 included. Appropriate cables were obtained and I fitted one drive and made the required connections, ran the VIA SATA Raid driver install program and expected that all would be well.

It’s worth a thousand words. If you are fully aware of the category of your question, you satq choose one of the categories below for frequently asked questions.

How can I fix it? Please enter a valid email address. I next fitted a jumper to halve raud data rate as per the Samsung blurb but this had no observable effect. After I had tried this a couple of times with variations including trying the other drive, I shut down the system and disconnected the drive before restarting.


P4V88 and SATA HDDs

I also exchanged the motherboard for a similar one which I intended to use to build a printer server, and fitted all the ancilliary hardware and started that up with identical results to those previously obtained.

Please adjust the jumpers of your SATA2 3. Just for completeness, I reinstalled the now partitioned and formatted Samsung drive into the PC in place of the Western Digital drive and managed to achieve the same result. Press Space on keyboard to toggle checkbox. If so, where do I get a driver that will work?

When you install the hard drive on the RAID card, you would need to press F6 to install third party driver during the Windows installation, and the driver is the reason why you can use whole GB even your Windows XP service pack 1 is not included.

For detail, please refer Intel official website: You can’t post answers that contain an email address.